The Place

Hi,

Do you still have a F1 error, if so locate the white I/F connector and put a shorting wire across the red/white wire connector pin and the black/white connector pin , this will then give you the error code on your clocks which you can check online.

Alan

Hi,
I spoke with Doug at Yoshi, unfortunately they dont have that information. The ECU's and kit harnesses were supplied by Bosh and Yoshi no longer use these ECU's. Very strange non of the guys have the original spec that they gave to Bosh ????????????

Hi,

Thanks for the file, cannot remember how accurate this file is. I should as it was me that produced it.

Old age is a bastard cannot remember what i did yesterday !!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi,

I am using a standard harness, in the standard harness the side stand switch is wired through the relay next to the fuse box, in the Yoshi kit harness the side stand connector is wired directly to the ECU, I need to find the pin on the ECU.

Hi Guys,

Need help identifying the pin connections on a Yoshi ECU for the quick shifter.

Working on a Yoshi Empro ECU for K6 GSXR 600, I do not have access to a Yoshi kit harness to find out which pin they use for the quick shifter.

Spoke with Yoshi in the States and even they do not have this ...

Hi,

I am trying to find a set of drawings for the front and rear suspension setup, I am trying to identify some bits that need ordering.

Not looking for CAD drawings, just a set of drawings so I can identify all the bits.

Hi,

Just found this, not 100% about where it came from.

It shows blue/green pin 15 on the black connector.

Hi,

If you have a Yoshi race loom, there should be a green plug (same as side stand plug) which is wired for the quickshifter.

Remember to set it up in the software.

On the ECU Yoshi for a 1000cc on a normal harness it is pin 51 or 52 (blue/black) (blue/white) one was for the quick shift the ...

This decision is so wrong,

If Tim or the Birchall team is good enough to dominate the series then why stop them, Maybe Red bull should be blocked from racing in F1 2014 because they dominated the 2013 season.
Domination of a sport by one team can only help to raise the bar for the other teams ...

Hi,

Do not attempt to run the fuel pump directly from the ECU always use a relay..(ECU is not designed to handel the current)