DMR wheel pcd ??

For Results,please see the timekeeper's office next door! To register, click the link in the top right corner.
ian staples
In Collection Area
Posts: 6
Joined: Wed Jun 27, 2018 3:17 pm
D/P/T/M/S: driver
Full Name: Ian Staples

DMR wheel pcd ??

Unread post by ian staples »

Hi All, I have a DMR side wheel that has come loose and chewed out the drive pin holes. I intend to bore them out and put sleeves in . Can anybody please tell me the PCD of the holes
Regards Ian.
User avatar
steve-e
Site Admin
Posts: 8808
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:

Re: DMR wheel pcd ??

Unread post by steve-e »

You could try ringing Dave himself? I'll private message you a number.
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
User avatar
NickO
One Lap Completed
Posts: 89
Joined: Thu Jun 15, 2006 9:25 am
D/P/T/M/S: Tea boy
Full Name: Nick Oldfield
Location: Liverpool

Re: DMR wheel pcd ??

Unread post by NickO »

Vernier caliper across the o/d of opposite pins, minus the diameter of one pin, job done.
paulsparkie
Scything Through The Field
Posts: 114
Joined: Sun Feb 28, 2010 6:18 pm
D/P/T/M/S: Driver retired again
Full Name: sparkie
Skype contact: paulsparkie
Location: in the hills

Re: DMR wheel pcd ??

Unread post by paulsparkie »

Post Reply