Hi there,
Hopefully someone here knows the answer! I have a K9 engine with a standard loom plugged in with a Yoshi ECU. No immobiliser module is fitted and the key barrel is missing. I now have the clocks working so assume the ECU is running, but now need help with the immobiliser side. Am I right in thinking that the yoshi ECU has the immobiliser inhibited, but still requires a short cable to make the fuel pump enable. Also at the moment I am just bridging the pins on the ignition lines to get power, I am assuming this is ok? i have seen the keyless solution using the resistor but this is for USA ECUs that don't have an immobiliser. HELP!
Happy for PMs as I appreciate immobiliser bypasses shouldn't be common knowledge. Or on my mobile 07970597220
Any help would really be appreciated.
Regards
Steve
GSXR600 K9 Standard Loom, Yoshi ECU
-
STEVIEBOY491
- Scything Through The Field
- Posts: 161
- Joined: Sat Jul 17, 2010 6:43 pm
- D/P/T/M/S: Driver/Passenger
- Full Name: Steve Jackson
- Location: Leicestershire