Hi All, I have a DMR side wheel that has come loose and chewed out the drive pin holes. I intend to bore them out and put sleeves in . Can anybody please tell me the PCD of the holes
Regards Ian.
DMR wheel pcd ??
-
ian staples
- In Collection Area
- Posts: 6
- Joined: Wed Jun 27, 2018 3:17 pm
- D/P/T/M/S: driver
- Full Name: Ian Staples
-
steve-e
- Site Admin
- Posts: 8920
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: DMR wheel pcd ??
You could try ringing Dave himself? I'll private message you a number.
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember
-
NickO
- One Lap Completed
- Posts: 89
- Joined: Thu Jun 15, 2006 9:25 am
- D/P/T/M/S: Tea boy
- Full Name: Nick Oldfield
- Location: Liverpool
Re: DMR wheel pcd ??
Vernier caliper across the o/d of opposite pins, minus the diameter of one pin, job done.
-
paulsparkie
- Scything Through The Field
- Posts: 118
- Joined: Sun Feb 28, 2010 6:18 pm
- D/P/T/M/S: Driver retired again
- Full Name: sparkie
- Skype contact: paulsparkie
- Location: in the hills