everyone is friendly and willing to give advice 
Airbox?
-
Richard Rollings
- Throttle on the Stop
- Posts: 540
- Joined: Wed May 21, 2008 6:00 pm
- D/P/T/M/S: driver/teaboy
- Twitter: @madmille
- Location: South Lincolnshire
Re: Airbox?
There is no shame in asking for help on here Metalface everyone is friendly and willing to give advice
everyone is friendly and willing to give advice No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.
-
Metalface.
- Scything Through The Field
- Posts: 148
- Joined: Sun Oct 07, 2012 10:16 am
- D/P/T/M/S: Super Hero.
- Full Name: Mark Berry
- Location: Bolton.
- Contact:
-
ianp
- On the Starting Grid
- Posts: 17
- Joined: Thu Jun 15, 2006 9:55 pm
- D/P/T/M/S: Retired driver
- Full Name: ian povey
- Location: northfleet
Re: Airbox?
the last ducts I brought were from Stuart at Martek, Demon Tweeks also do some. I brought the duct pipe from Demon Tweeks and then found out my local hose and coupling suppliers did it as well 
Old drivers dont give up, our leathers just get too tight
-
gatekeeper
- Setting the Fastest Lap
- Posts: 233
- Joined: Tue Jul 31, 2007 6:51 am
- D/P/T/M/S: dodgy driver
- Full Name: ian[gatey]derbyshire
- Location: sunny heanor but its raining
-
lovingit
- Setting the Fastest Lap
- Posts: 251
- Joined: Wed Jun 14, 2006 9:09 pm
- D/P/T/M/S: driver
- Full Name: dean banks
- Twitter: @f2sidecar
- Location: staffs
Re: Airbox?
Dream as if youll live forever and live as if youll die tomorrow.... Happy days
-
Metalface.
- Scything Through The Field
- Posts: 148
- Joined: Sun Oct 07, 2012 10:16 am
- D/P/T/M/S: Super Hero.
- Full Name: Mark Berry
- Location: Bolton.
- Contact:
-
tufty113
- Setting the Fastest Lap
- Posts: 273
- Joined: Sun Jul 22, 2007 8:07 pm
- D/P/T/M/S: driver(well try to)
- Full Name: matt dix
- Location: near the french!!!!!
Re: Airbox?
The air box that dean showed was made by Jason miller. Poss that may help. We had the same box and he does an insert for a k&n air filter.we fitted a rubber seal using a old inner tubing cut and super glued to the underside of the air box. Made it very air tight and stopped grit and grime getting in. You may need to alter any box as you have the top tubes. It Worked well ta Dixie.
-
stormdog
- On the Starting Grid
- Posts: 23
- Joined: Wed Jun 20, 2007 12:26 pm
- D/P/T/M/S: Ex P, T.
- Full Name: ian menmuir
- Location: Edinburgh, Bonnie Scotland
- Contact:
Re: Airbox?
Paul @ dynobike does a lovely carbon air box for f2's
Too busy with everyone elses bike to fix my own!! NO!I SAID A FIREPLACE NOT A FIREBLADE!
-
tufty113
- Setting the Fastest Lap
- Posts: 273
- Joined: Sun Jul 22, 2007 8:07 pm
- D/P/T/M/S: driver(well try to)
- Full Name: matt dix
- Location: near the french!!!!!
Re: Airbox?
That he does but is more suited for injection and a outfit without top tubes. Personally look at Jason's if your sticking with the thundercat engines as its made for them. What ever you try and fit it will be hard with them top frame tubes. Ta Dixiestormdog wrote:Paul @ dynobike does a lovely carbon air box for f2's
-
Metalface.
- Scything Through The Field
- Posts: 148
- Joined: Sun Oct 07, 2012 10:16 am
- D/P/T/M/S: Super Hero.
- Full Name: Mark Berry
- Location: Bolton.
- Contact:
Re: Airbox?
I think I'm going to try and use the cover I have as part of it like Eddy Wright mentioned.
Beauty is in the eye of the beer holder.