Page 1 of 2
750 phoenix engine
Posted: Sat Nov 17, 2007 5:33 pm
by TonyW
Any of these still knocking about ? was there a 680 also ?????

Posted: Sun Nov 18, 2007 12:09 pm
by RP
Nigel Rollason probably still has one.
Posted: Sun Nov 18, 2007 12:20 pm
by ianw
Only twoI know of is Nigel Rollason as RP say's & a mate of Bill Crook's, Paul Hanson who came out in Forgotten Era now & again. That was about 14-15 years ago.
Posted: Sun Nov 18, 2007 12:46 pm
by TonyW
I seem to remember Colin Hopper running one, he sold the outfit on to a guy called Brian Wilson from crewe, it was in a Rumble chassis (I remember that bit coz I actually bought the rolling chassis :d ). Don't know what happened to the engine because the chassis had been converted to take a TZ750 for the TT.
Stupidly I sold the chassis on a bit later

Posted: Sun Nov 18, 2007 1:06 pm
by ianw
Could be the same bike that Colin had, I know he's a mate of Paul Hanson.
I know who could defo tell us & that is the handsome Wal from the Isle of Man.

Posted: Tue Nov 20, 2007 8:37 pm
by woody
Ian that has to be the Paul Hanson most people new as MOONRAKER,as in the area of Manchester?
Posted: Tue Nov 20, 2007 8:51 pm
by ianw
That's him Keith, last time I spoke to him he didn't seem in the best of health. Last time I saw him out he was being helped by Colin Hopper, it was good to see them both.
Posted: Sat Dec 01, 2007 6:13 pm
by Wal
Sorry Ian, missed this one. Yep I raced a Phoenix for a while, back in the days when you and I both had hair

..what a fantastic engine
I don't have the chassis anymore, I think John Childes ended up with that with a 600 Honda in it

but I do still have the engines :d
Posted: Sat Dec 01, 2007 10:07 pm
by ianw
You lucky F---ker, when are you going to bring them out for a play Wal?
Does Paul hanson still have his?
Posted: Sun Dec 02, 2007 10:39 am
by Wal
OH YES !! I would love to have a play, I’ve been looking round for an old 750 Ireson roller for a while, like you, I would love to put a proper British bike together. Unfortunately most of the ones that I followed up have had 600 engines butchered into them.
As far as I am aware, Paul does still have his just like he probably still has ‘Moonraker’ ! I don’t think he ever sells anything.

Posted: Sun Dec 02, 2007 11:50 am
by ianw
Wal, a mate of mine worked for Barton in Caernarvon building the Pheonix engines around the time of the "Silver Dream racer".
he told me of the story of the day Eric Buell arriving there & bought the whole business. Theres mention of this in Eric Buell's History of the Buell. Sad how he just let the Pheonix engine "die"
Posted: Sun Dec 02, 2007 1:00 pm
by Wal
They’re not dead Ian, just sleeping…they will live to run another day, as the name implies !
As I said, Paul Hanson has at least one, as does Nigel R, who also has his complete TT winning bike, he ran it in the parade this year. I have enough bits to put 4 or 5 ish engines together and I know the whereabouts of 3+ solos, all being labelled as “the one and only original Silver Dream Racer” !
I believe Barry Hart is running a Porsche Garage in Bolton called Hartech. Although probably the man to talk to is the other half of the Barton team, Graham Dyson of Nova Transmission fame, font of all knowledge. :gott:
bartons
Posted: Mon Dec 03, 2007 11:01 am
by speech
eric buell did not let the project die , he bought the phoenix to race as F 750 solo unfortunately just as he got the 1st one built the class was dropped.
paul still has his 750- originally in a derbyshire chassis then we tried it in a long hopper.It had loads of go but needed 8 flywheels and a new ignition to be reliable
Re: 750 phoenix engine
Posted: Tue Sep 13, 2011 12:01 am
by moonraker
yes wally i still have the moonraker triumph and the derbyshire phoenix and the 350 hopper armstrong and the long hopper chassis maybe nobody wants to buy anything once i have owned it i rode the phoenix at the festival of 1000 bikes 2008 and 2010 nigel rollason rode there in 2010 he did not look any different than he did 30 years ago
Re: 750 phoenix engine
Posted: Wed Sep 14, 2011 4:32 pm
by Wal
Hey Paul, good to see you on here, hope your OK ? Re the Phoenix, it was sad to see them go but I’ve sold my 5 or so Barton Phoenix engines to Chris Alty, on here as 16000rpm, he’s a great guy and doing wonderful things with them building some solos and what a good job he’s doing too.
If you’re about, I see he’s riding an F1 outfit at Aintree this coming weekend.