biten by the bug

[little chud]

getting a bit excited now. got engine in the bike last night but while I was doing it had problems with workshop lights.....soon sorted it with the genni and spot lights..........best bit was I ran it on avgas n A747 oh the aroma of 747 wafting into the workshop

then been listening to testing at mallory via satalite link (ok it was dougs phone).

not long now.

do we know how many 350/PC's will be out?

I know of

Paul Owen
Alan Steele
Dave Saunders
Ian Arnold
Steve Brookes
Me n Doug
Dave Tibs and Wayne
Stu Mellor


not sure about

team not so past it
chap with hamyam
pat gallagher
chris???? big susuki?
tony wheetley
alan/john with YPVS 350

any ideas anyone.

jc.

[Big Tim]

Did you get that clutch put together ok ? Hope you've put it on before you put the motor in the frame ? And put the plates in the right way round this time !

747 in the genny ! You must be feeling flush ...

[wayne]

you need valvoline and optimax thats best he he he then your on a winner!!! then you may be able win a race wiv that

have a look at the site
http://www.valvolineeurope.com/english/ ... _consumers" onclick="window.open(this.href);return false;

[Tibs]

Working like mad on the flying frog only missing an engine, bit of plastic and some rubber, but will be there on the 4th.
For those interested in a meal afterwards my local Elephant & Castle PUB is 3 miles from mallory has 5 real ales and also does Pub type food of faggots or home made pies etc etc (veggies and passengers catered for) at around 6.50 a good platefull. I have reserved a table for ten of us at the present.

Not had my Auto 66 Cadwell entry book come as yet, but plan to be there with the sledge and the outfit, thermals and shorts. Don't forget to prebook with Mallory 01455 842931.

Wayne are you ready!!!!

[Big Tim]

Forget Mallory the pub sounds far more appealling ... let's just go straight there !

[little chud]

nice one tibs. me doug and big tim and poss dougs lad will be there. Do they do rooms for the night? knowing hoe you fiorce beer in to us non drinkers I doubt we'll be driving back

I think you should bring your knee pads to cadwell, you know how slippy it can be when drunk.......er frosty.

wayne, to win a race we need to be fast, don't matter wot oil we have it won't make a difference anyway bud, you forget we had 3 wins last year including beating the tractors on their omtimax

Timothy, how dare you suggest I put the plates in the wrong way round! Doug did it. he didn't really but how was I meant to know. anyway most of em were rd400 so didn't have chamfer.

anyway no didn't get it put together cos I forgot to pick the rivets up from my office ont he way to the workshop.......about 5 miles away. doh. Part built it and sussed the new centre is made for non bearing type clutches. the bearing makes the basket about 3-4mm thicker so the boss in the back of the centre is too long. I machined it down and its spot on.

as for 747 in genny, using up all the old avgas that is full of that crap out of the tank..... runs well on it I guess we could filter it but would rather use fresh in the bike.


jc.

[martyf350]

i shall be at cadwell 1 way or another im really looking forward to the season!gettin my leathers patched up on monday, then goin shopping for a new skid lid then i will be sorted!!!!!!!

marty

[little chud]

nice one marty. you on with steely?

[wayne]

Working like mad on the flying frog only missing an engine, bit of plastic and some rubber, but will be there on the 4th.
For those interested in a meal afterwards my local Elephant & Castle PUB is 3 miles from mallory has 5 real ales and also does Pub type food of faggots or home made pies etc etc (veggies and passengers catered for) at around 6.50 a good platefull. I have reserved a table for ten of us at the present.

Not had my Auto 66 Cadwell entry book come as yet, but plan to be there with the sledge and the outfit, thermals and shorts. Don't forget to prebook with Mallory 01455 842931.

Wayne are you ready!!!!

o yes i am ready cheers dave

[wayne]

nice one tibs. me doug and big tim and poss dougs lad will be there. Do they do rooms for the night? knowing hoe you fiorce beer in to us non drinkers I doubt we'll be driving back

I think you should bring your knee pads to cadwell, you know how slippy it can be when drunk.......er frosty.

wayne, to win a race we need to be fast, don't matter wot oil we have it won't make a difference anyway bud, you forget we had 3 wins last year including beating the tractors on their omtimax

Timothy, how dare you suggest I put the plates in the wrong way round! Doug did it. he didn't really but how was I meant to know. anyway most of em were rd400 so didn't have chamfer.

anyway no didn't get it put together cos I forgot to pick the rivets up from my office ont he way to the workshop.......about 5 miles away. doh. Part built it and sussed the new centre is made for non bearing type clutches. the bearing makes the basket about 3-4mm thicker so the boss in the back of the centre is too long. I machined it down and its spot on.

as for 747 in genny, using up all the old avgas that is full of that crap out of the tank..... runs well on it I guess we could filter it but would rather use fresh in the bike.


jc.

he he he just messin

[martyf350]

yeah we are continuing the succesful partnership that formed last season and looking forward to having a good season!!!!

marty