Page 1 of 1
Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 1:12 am
by Jeff
What is a Dave Cheesemond quick release front end?
I have seen them in ads in the classifieds, does anyone have pictures?
Jeff
Re: Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 8:19 am
by long legs
ask pete alton from OTC dyno he has one on his baker ,its good bit of engineering
Re: Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 8:59 am
by lovingit
They are the dogs dangleys discs and calipers stay static when you take your wheel out mega fast to change wheel
Re: Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 10:37 am
by Jeff
So does that mean you only need one pair of discs for all your front wheels?
Jeff
Re: Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 10:53 am
by gatekeeper
yep they stay in place good bit of kit
Re: Dave Cheesemond quick release front end
Posted: Sat Aug 22, 2009 1:36 pm
by tufty113
this is it on my baker f2...
Re: Dave Cheesemond quick release front end
Posted: Mon Aug 24, 2009 10:17 pm
by Eddy Wright
Yes they look the bus !
Re: Dave Cheesemond quick release front end
Posted: Sun Sep 06, 2009 11:07 pm
by craig hauxwell
And dont forget the most important bit lads.....................they work.
Re: Dave Cheesemond quick release front end
Posted: Fri Sep 11, 2009 10:26 am
by Wal
The ‘QR’ system is a really well made piece of kit from Dave.
Seeing it again prompted me to remind you guys that as the original supplier of disc rotors to Terry Windle, West Performance now has the full range of F2 ‘Windle’ discs, rotors and buttons in stock on the shelf.