The Place

Does any one know what disks Joe used to use on his 350 chassis they are the none vented type 4 stud with a small off set

Im guessing they are off a production car something readily available

Dont realy wont to spend weeks at local car spares shop trying to find the ones that match

Thanks For the help

barryj wrote:Does any one know what disks Joe used to use on his 350 chassis they are the none vented type 4 stud with a small off set

Im guessing they are off a production car something readily available

Dont realy wont to spend weeks at local car spares shop trying to find the ones that match

Thanks For the help

FORD Cortina 1.3-1.6-2.0-2.3 (MK III-IV-V) 70 to 82
Mind you - some I've seen fitted to the chair hub appear to be off a different model - from memory - the offset is a bit different.
You'll need to machine about 6mm off the thickness too.
Brembo Part Number 08.2275.10
Thickness 12.7
Fixing Holes 4
Overall Height 26.8
Diameter 247.5
Centering Diameter 68.4

Thanks for that

All the disks are the same on this bike

Cheers