Klaus Enders Busch Chassis
- Kieran Clarke
- Scything Through The Field
- Posts: 103
- Joined: Sat Sep 19, 2009 8:55 pm
- D/P/T/M/S: Passenger
- Full Name: Kieran Clarke
- Twitter: Mogli_9
- Location: Leeds - West Yorkshire
- Contact:
Klaus Enders Busch Chassis
In 1972 as you all know Dieter Busch built a lovely sheet steel chassis for Klaus Enders to race in the world championship. Since then Otto Haller a friend of Dieters has made a copy of the chassis with the help from Dieter himself. The CRMC rules state 'Steel plate reinforcing is permitted particularly in area such as the steering head however excess plating or large sheet steel areas are not allowed the chassis must be visibly constructed of tubular steel'. My question is why can't the Busch sheet steel chassis be replicated and raced in the CRMC if it was within the period?
Mogli
Mogli
Mogli - Team Eddys - http://www.eddys-moto.co.uk
Re: Klaus Enders Busch Chassis
Rudi Kurth built and raced his sheet steel fabricated chassis in the 1960s, some five years before Busch.
As to why the CRMC will not accept them is mystifying, and rather frustrative.
The elegibility of Konig engines is well documented, and is without doubt.
But for reasons best known to themselves, the CRMC will still not accept them.
As to why the CRMC will not accept them is mystifying, and rather frustrative.
The elegibility of Konig engines is well documented, and is without doubt.
But for reasons best known to themselves, the CRMC will still not accept them.
-
- One Lap Completed
- Posts: 94
- Joined: Sun Jun 06, 2010 12:07 pm
- D/P/T/M/S: Ex Passenger
- Full Name: tim dixon
- Location: Isle of Man
Re: Klaus Enders Busch Chassis
I know it may be because I have an ex passengers brain, but it always puzzles me why you can't use a Busch replica.You can use new outfits built nearly to F2 spec. No names mentioned.
-
- Lapping the Tail Enders
- Posts: 369
- Joined: Wed Jun 14, 2006 7:54 pm
- D/P/T/M/S: driver
Re: Klaus Enders Busch Chassis
would folk like to see a busch replica cause they would ,but will they ever get the chance no way ,i can't use my bm as it's got the wrong tyres on,yet there's bike's out there wider than mine is long how do you work that out ,i'm 2/3 rds building one out of box section it's not a busch replica but it's looking good will i try to get it into crmc rounds what's the point think i speak the truth about the clicky git's ,get it out with us accross the channel where it does'nt matter what colour or some other farsical rule they seem to make up to suit themselve's,
- steve-e
- Site Admin
- Posts: 8840
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: Klaus Enders Busch Chassis
Some pics from 666
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember
-
- Lapping the Tail Enders
- Posts: 369
- Joined: Wed Jun 14, 2006 7:54 pm
- D/P/T/M/S: driver
Re: Klaus Enders Busch Chassis
now ain't that a thing of beauty,that was a proper job!
- sidecarracing
- Setting the Fastest Lap
- Posts: 218
- Joined: Thu Jun 22, 2006 9:43 am
- D/P/T/M/S: Driver
- Full Name: John Nienhuis
- Location: Holland
- Contact:
Re: Klaus Enders Busch Chassis
Make a replica with the same skinny tyres and drum brakes and 500cc engine and I think you would be fine!
-
- Setting the Fastest Lap
- Posts: 211
- Joined: Fri Jul 29, 2011 7:58 am
- D/P/T/M/S: D
- Full Name: michel Duneige
- Location: Santa Cruz Bolivia
Re: Klaus Enders Busch Chassis
I do not believe you would be fine, more like you would be told to take a hike.!!
- Kieran Clarke
- Scything Through The Field
- Posts: 103
- Joined: Sat Sep 19, 2009 8:55 pm
- D/P/T/M/S: Passenger
- Full Name: Kieran Clarke
- Twitter: Mogli_9
- Location: Leeds - West Yorkshire
- Contact:
Re: Klaus Enders Busch Chassis
If Klaus Enders himself turned up on that bike in the CRMC they would have to turn him away, not because of the sheet steel construction but because of the wide back tyre!
Here we have Rudi's outfit.
Here we have Rudi's outfit.
Mogli - Team Eddys - http://www.eddys-moto.co.uk
- 666
- Setting the Fastest Lap
- Posts: 283
- Joined: Mon Feb 18, 2008 1:14 pm
- D/P/T/M/S: gofor
- Skype contact: JRS RACING
- Location: suffolk
Re: Klaus Enders Busch Chassis
4 pic's of Enders bike were taken at British GP at Silverstone in 1972, the 5th was taken in IOM i think
-
- Setting the Fastest Lap
- Posts: 211
- Joined: Fri Jul 29, 2011 7:58 am
- D/P/T/M/S: D
- Full Name: michel Duneige
- Location: Santa Cruz Bolivia
Re: Klaus Enders Busch Chassis
Banning replicas of these outfit seems some how disrespectful of the original builders and riders, but that's just my thinking.
- sidecarracing
- Setting the Fastest Lap
- Posts: 218
- Joined: Thu Jun 22, 2006 9:43 am
- D/P/T/M/S: Driver
- Full Name: John Nienhuis
- Location: Holland
- Contact:
Re: Klaus Enders Busch Chassis
Let's see...you are talking about a "replica"...RARING TO GO wrote:Banning replicas of these outfit seems some how disrespectful of the original builders and riders, but that's just my thinking.
Im my eyes a replica of the Enders outfit would have the same dimensions wheels/tyres as the original, and drum brakes and a 500 Rennsport engine... not disc brakes and +1000cc engine and different wheel/tyre sizes...like all modern so-called "classic" outfits have...
I think a proper replica would not be banned.
-
- Throttle on the Stop
- Posts: 542
- Joined: Sun Aug 20, 2006 6:26 pm
- Location: dorset
Re: Klaus Enders Busch Chassis
I think sidecarracing has got it spot on, nobody could ban a totally faithfull replica,but who is going to stump up zillions for a Rennsport engine,it might be possible to replicate the Rudi Kurth outfit for a lot less money ?
p.a.caughlin
- 666
- Setting the Fastest Lap
- Posts: 283
- Joined: Mon Feb 18, 2008 1:14 pm
- D/P/T/M/S: gofor
- Skype contact: JRS RACING
- Location: suffolk
Re: Klaus Enders Busch Chassis
kface wrote:I know it may be because I have an ex passengers brain, but it always puzzles me why you can't use a Busch replica.You can use new outfits built nearly to F2 spec. No names mentioned.
Mr Face, would you tell me please tell me the points on newly built classic chassis which are close or the same as F2.
Regards John.
-
- One Lap Completed
- Posts: 94
- Joined: Sun Jun 06, 2010 12:07 pm
- D/P/T/M/S: Ex Passenger
- Full Name: tim dixon
- Location: Isle of Man
Re: Klaus Enders Busch Chassis
Hello Mr Sample, long time no hear. As I say I was only dangling off the side bit,but as I understand one of the last outfits I raced on had a very similair wheelbase to an F2. Lets just say it was the widest and most angled platform I have ever slept on.Very different from the two Busch outfits Dick raced.I know which was I think were the proper oufits.Apart from that I haven't got a clue, other than that it had 3 wheels and a noisy suck bangy thing.Also an engine.