Page 1 of 1
Mac Hobson and ??
Posted: Sun Sep 13, 2015 7:41 pm
by saluki1968
Any help on IDing these photos? I believe the driver is Mac Hobson, and the passenger may be Kenny Birch. Looks like the same rig in both photos and possibly at the same race. My question is where and when were these photos taken. Anyone have the answers?
Re: Mac Hobson and ??
Posted: Sun Sep 13, 2015 8:08 pm
by ianw
Defo not Kenny Birch, too early for Kenny.
Re: Mac Hobson and ??
Posted: Sun Sep 13, 2015 9:07 pm
by Jim Sinnott
Geoff Atkinson 1970 TT
Re: Mac Hobson and ??
Posted: Mon Sep 14, 2015 1:18 pm
by saluki1968
Mac Hobson & Geoff Atkinson at the 1970 TT then! Thanks!
Re: Mac Hobson and ??
Posted: Mon Sep 14, 2015 2:06 pm
by Jim Sinnott
You welcome
Re: Mac Hobson and ??
Posted: Mon Sep 14, 2015 5:07 pm
by tonybsa2008
On a Windrick BSA.
Re: Mac Hobson and ??
Posted: Fri Sep 18, 2015 4:18 pm
by oldbelly
tonybsa2008 wrote:On a Windrick BSA.
With Lamplas bodywork. Malcolm would use anything that was free.
Re: Mac Hobson and ??
Posted: Fri Sep 18, 2015 5:53 pm
by MUNGO
First pic, coming out of Parliament Square, Ramsey. Second pic, somewhere between Brandywell and Windy Corner.
Re: Mac Hobson and ??
Posted: Sun Sep 27, 2015 8:25 pm
by teamarc
I remember this bike, Cowie Bsa using a full works Bsa motor supplied by Burt Perigo from the competition dept at Bsa. Mac sent it back to Bsa for some minor oil leak when my father was away on holiday and it vanished. They gave Cowies 4 std motors to compensate the situation but there was hell on about it. Word on the grape vine was a certain Mr Chris Vincent found out about it and that's where it ended up. What ever happened to it we never saw it again.
Re: Mac Hobson and ??
Posted: Tue Sep 29, 2015 11:58 pm
by oldbelly
Malcolm got his motors from the same place as we all did. They were about £50 a piece and a bit hot. Percy Austrin did all of Malcolms A65 engines.
Re: Mac Hobson and ??
Posted: Wed Sep 30, 2015 10:43 am
by mervnoble
oldbelly wrote:Malcolm got his motors from the same place as we all did. They were about £50 a piece and a bit hot. Percy Austrin did all of Malcolms A65 engines.
That reminds me of the "Loughborough" Kawasakis of the '80's, £200 a pop I seem to recall
