Page 1 of 2

Info on this windle chassis

Posted: Mon May 09, 2016 10:10 am
by Andy M
Hi have just bought this chassis reputed to be early WINDLE ignore front end as im modifying that as it came with a very narrow spoked hub and nothing else.no brake cylinders and one odd disc have lots of honda two potters from vf 1000 that i think i can mod to fit.Will try to put up some pics.
When i can figure out how think i need help on this also. TIA.

Re: Info on this windle chassis

Posted: Sat May 21, 2016 10:11 am
by Andy M
Steve English is going to help put up pics

Re: Info on this windle chassis

Posted: Sat May 21, 2016 11:21 am
by steve-e
I am, I'm just trying to find where I saved them. I remember sitting there saving them as you sent them all that time ago!

Re: Info on this windle chassis

Posted: Sat May 21, 2016 11:23 am
by steve-e
13046353_1430268516999331_625114474_n.jpg
13046353_1430268516999331_625114474_n.jpg (60.36 KiB) Viewed 10420 times
13140776_1430269046999278_2135561603_n.jpg
13140776_1430269046999278_2135561603_n.jpg (60.9 KiB) Viewed 10420 times
13141028_1430267050332811_1701656734_n.jpg
13141028_1430267050332811_1701656734_n.jpg (59.37 KiB) Viewed 10420 times
13153376_1430267336999449_638631764_n.jpg
13153376_1430267336999449_638631764_n.jpg (48.47 KiB) Viewed 10420 times
13153385_1430267240332792_1010411776_n.jpg
13153385_1430267240332792_1010411776_n.jpg (50.42 KiB) Viewed 10420 times
13162036_1430269923665857_2013923330_n.jpg
13162036_1430269923665857_2013923330_n.jpg (55.6 KiB) Viewed 10420 times
13181030_1430268623665987_476256601_n.jpg
13181030_1430268623665987_476256601_n.jpg (57.41 KiB) Viewed 10420 times

Re: Info on this windle chassis

Posted: Sat May 21, 2016 7:00 pm
by tonybsa2008
Looks like a windle/windrick to me.Very similar to my first outfit.The front forks in your pics also look like the Windle forks I have on my Norton.If you intend to race the outfit in the CRMC,OR VMCC you best not fit the Honda calipers you mention tho.

Re: Info on this windle chassis

Posted: Mon May 23, 2016 8:20 am
by Andy M
Thanks both for help ,only going to be in NHCA so wont hurt fitting honda callipers i just happen to have loads of them and wheels will turn with them but have to make new mounts. Fitting tuned vf1000 lump in so wont be eligable for circuit racing any way.

Re: Info on this windle chassis

Posted: Mon May 23, 2016 8:22 am
by Andy M
Does any one know if Windles put chassis number on or build number cant seem to find one.

Re: Info on this windle chassis

Posted: Mon May 23, 2016 1:18 pm
by Boris Stroud
They don't, however there are bikes with numbers that were used in Europe so they were tracked. This was run with an old log book for traceability. The chassis will have certain characteristics that will give you clues, where most of the very early bikes will be matched , pattern checked or similar to ones that were modified later on. If all that makes sense.

Good Luck

Re: Info on this windle chassis

Posted: Tue May 24, 2016 11:40 pm
by oldbelly
We had the second Windrick , built over the winter of 69 / 70. The one pictured looks the same as ours was.

Re: Info on this windle chassis

Posted: Wed May 25, 2016 9:23 am
by Andy M
Yes thanks can make sense of it but dont think it will help much as this is all i have but hey ho i will overcome it will probably look a lot different when finished as it looks as if it came with triumph or bsa motor but fitting vf1000r lump in. Originality doesnt really matter where i intend running it NHCA as Forgotten era outfit which is pre 89.Thats great was led to believe it was a 70 one so at least thats something i know now.

Re: Info on this windle chassis

Posted: Wed Jul 13, 2016 1:20 pm
by Boris Stroud
Andy

It may be an Early pre 70, I was talking to Lou Ward who raced a windrex unit and he would be able to help you . Call me I will give you his details. Triumph and BSA would be about right

Re: Info on this windle chassis

Posted: Wed Jul 13, 2016 7:52 pm
by oldbelly
As I said above , we had the second Windrick ever built over winter 69 / 70. If the bike pictured isnt a Windrick of that time , its a good copy.

Re: Info on this windle chassis

Posted: Wed Jul 13, 2016 8:10 pm
by tonybsa2008
Shame to modify it,after it has survived all these years relativly unmolested.

Re: Info on this windle chassis

Posted: Wed Jul 13, 2016 8:12 pm
by ianw
The main frame loop, swing arm, rear rubber suspension, rear hydrauilic dampers are identical to the outfit terry built for my Weslake in 1975.
I think the year before he went to 13" wheels????

Re: Info on this windle chassis

Posted: Wed Jul 13, 2016 8:42 pm
by sidecarracing
ianw wrote:The main frame loop, swing arm, rear rubber suspension, rear hydrauilic dampers are identical to the outfit terry built for my Weslake in 1975.
I think the year before he went to 13" wheels????

And in the Classic class with the cut-off date set on 31-12-1972 most are on 13" wheels nowadays - strange isn't it? :lol: