Tuned Suzuki L3 600cc engines
Posted: Tue Dec 13, 2016 11:32 pm
I have 2 Suzuki GSXR 600 L3 engines for sale. Both have been tuned by Motrac Racing but at different specs. As follows ;
1. Fully tuned 600cc L3 which was fully refreshed with new pistons, rings, valves, collets and springs. It had a second top end rebuild in September to keep the engine fresh. This motor has a few lap records and lapped the TT at 113mph, its quick!
Work carried out :
Yoshimura high lift cams,
Dyson 6th gear fitted but also have original,
Adjustable cam wheels,
ported and gas flowed head,
balanced crank, rods and pistons,
high compression kit gasket,
superfinished cam, crank, buckets, gearbox
Blueprinted and dialed in brilliantly
Price £3000
2. Almost British Championship tuned 600cc L3, fully rebuilt in April with new rings, valves and collars. Its not had much use this year, about 150miles. Its tuning spec is :
Superfinished cams, crank, buckets and gearbox,
K6/7 cams fitted
adjustable timing wheels,
balanced crank, rods and pistons
high compression kit gasket
blueprinted and dialed in brilliantly
Tony Baker sump
Price £2000
These engines have been well maintained and with no expense spared.
Drop me a message if your interested,
Cheers,
Alan
07730 584607
1. Fully tuned 600cc L3 which was fully refreshed with new pistons, rings, valves, collets and springs. It had a second top end rebuild in September to keep the engine fresh. This motor has a few lap records and lapped the TT at 113mph, its quick!
Work carried out :
Yoshimura high lift cams,
Dyson 6th gear fitted but also have original,
Adjustable cam wheels,
ported and gas flowed head,
balanced crank, rods and pistons,
high compression kit gasket,
superfinished cam, crank, buckets, gearbox
Blueprinted and dialed in brilliantly
Price £3000
2. Almost British Championship tuned 600cc L3, fully rebuilt in April with new rings, valves and collars. Its not had much use this year, about 150miles. Its tuning spec is :
Superfinished cams, crank, buckets and gearbox,
K6/7 cams fitted
adjustable timing wheels,
balanced crank, rods and pistons
high compression kit gasket
blueprinted and dialed in brilliantly
Tony Baker sump
Price £2000
These engines have been well maintained and with no expense spared.
Drop me a message if your interested,
Cheers,
Alan
07730 584607