I am in need of a different shaped screen, I am thinking of making them. It seems vacuum moulding is the process with bucks. Can anybody tell me how its done and how to make the bucks, I have heard elliptical bucks can be made without carving them?
Thanks
How to make screens
-
- On the Starting Grid
- Posts: 18
- Joined: Fri Nov 05, 2010 5:25 am
- D/P/T/M/S: driver
- Full Name: John Daley
- Location: Bendigo, Australia
How to make screens
John Daley
Sidecar racer
Bendigo, Australia
Sidecar racer
Bendigo, Australia
- Eurocup
- Setting the Fastest Lap
- Posts: 259
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: How to make screens
Hi
speek to people who build glider. Many years ago Dieter Busch was using screens from gliders.
Good Luck.
Bye Eckart
speek to people who build glider. Many years ago Dieter Busch was using screens from gliders.
Good Luck.
Bye Eckart
- Wal
- Setting the Fastest Lap
- Posts: 202
- Joined: Fri Jun 16, 2006 8:04 am
- D/P/T/M/S: Driver/Teaboy
- Full Name: Wally Saunders
- Location: Isle of Man
- Contact:
Re: How to make screens
Not saying that you will get it right first time, but it’s not rocket science.
The basics for DIY are, two sheets of plywood, a sheet of screen material, polypropylene or such like, some heat and an air line. . . .what can possibly go wrong !!
The basics for DIY are, two sheets of plywood, a sheet of screen material, polypropylene or such like, some heat and an air line. . . .what can possibly go wrong !!