Page 1 of 2
Wheel Rims
Posted: Sat Mar 03, 2018 12:11 pm
by johnmitch93
OK, so where can I buy some wheel rim halves...?
I need to convert the rear wheel from 13inch to 14inch.
John.
Re: Wheel Rims
Posted: Sat Mar 03, 2018 12:59 pm
by lrb1
try dave cheesemond at d and d windle ive had rims from him
Re: Wheel Rims
Posted: Sat Mar 03, 2018 3:58 pm
by johnmitch93
Thanks lrb1, but Dave cannot supply 14inch rims for an F1 - he was the first person I asked...
Re: Wheel Rims
Posted: Sun Mar 04, 2018 7:10 pm
by lrb1
ok no probs what about mike richards
Re: Wheel Rims
Posted: Sun Mar 04, 2018 8:25 pm
by ianw
I'd try companies like Demon Tweeks, at the end of the day, split rim wheels came from the car world.
Measure the diameter of the hub, inner flange to inner flange & how many mounting holes there are, they will ask you that.
You dont say who made your wheel?
There are companies out there who specialise in split rims
http://www.imagewheels.co.uk/
Re: Wheel Rims
Posted: Mon Mar 05, 2018 8:23 am
by Kees Endeveld
What chassis do you need them for?
Re: Wheel Rims
Posted: Tue Mar 06, 2018 9:30 pm
by johnmitch93
It's for an RCN.
Any contact details for Mike...?
Re: Wheel Rims
Posted: Tue Mar 06, 2018 9:53 pm
by Kees Endeveld
Only Collin Nicholson, But i guess thats the first one he went to?
Re: Wheel Rims
Posted: Wed Mar 07, 2018 8:55 am
by paulsparkie
Re: Wheel Rims
Posted: Wed Mar 07, 2018 10:17 am
by 666
Barnby Engineering in Kent.01634 711801
Re: Wheel Rims
Posted: Sat Mar 10, 2018 12:01 am
by johnmitch93
Thanks all - talking to Mike R about it...
Re: Wheel Rims
Posted: Sat Mar 10, 2018 12:02 am
by johnmitch93
Thanks all - talking to Mike R about it...
Re: Wheel Rims
Posted: Sat Mar 10, 2018 5:28 pm
by dick tapken
image will do anything ,tell them what you want and they will do it no problem
Re: Wheel Rims
Posted: Sun Mar 18, 2018 10:36 pm
by johnmitch93
Hi Dick,
Who are Image, please...?
Re: Wheel Rims
Posted: Sun Mar 18, 2018 11:47 pm
by Dan
As in the earlier post by Ian
ianw wrote: Sun Mar 04, 2018 8:25 pm
I'd try companies like Demon Tweeks, at the end of the day, split rim wheels came from the car world.
Measure the diameter of the hub, inner flange to inner flange & how many mounting holes there are, they will ask you that.
You dont say who made your wheel?
There are companies out there who specialise in split rims
http://www.imagewheels.co.uk/