Suzuki GSRX1000 K7/K8 engine (needs rebuild) + spares
Posted: Sat Mar 10, 2018 5:54 pm
I am selling Suzuki GSRX1000 K7/K8 engine parts on behalf of friend who passed away. He used GSXR motors for his hillclimb car.
1. There is a full engine that needs rebuilding and needs a new crank. It will rebuild. It had a mild knock that we caught early before other damage done. The engine is complete but we lifted the head and dropped the sump to check it.
Also other parts:
2. Dismantled cylinder head with cams and valves. Please work on the assumption that there are a couple of bent valves. (It must have been stripped down for good reason!)
3. Gearbox cluster.
4. Clutch bits ~ pressure plate, friction plates, springs etc.
5. I think that there are a set of damaged engine cases. These are handy as a jig if anyone is building a chassis because they are a lot lighter than a full engine.
Wigan area.
MUST go so make an offer. I can send photos.
Craig on 07760 392355
1. There is a full engine that needs rebuilding and needs a new crank. It will rebuild. It had a mild knock that we caught early before other damage done. The engine is complete but we lifted the head and dropped the sump to check it.
Also other parts:
2. Dismantled cylinder head with cams and valves. Please work on the assumption that there are a couple of bent valves. (It must have been stripped down for good reason!)
3. Gearbox cluster.
4. Clutch bits ~ pressure plate, friction plates, springs etc.
5. I think that there are a set of damaged engine cases. These are handy as a jig if anyone is building a chassis because they are a lot lighter than a full engine.
Wigan area.
MUST go so make an offer. I can send photos.
Craig on 07760 392355