Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Classics, Post Classics, F350's, Vintage, Road Outfits
User avatar
steve-e
Site Admin
Posts: 8831
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:

Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Unread post by steve-e »

Classic 13“ BMW, chassis made by Tony Baker

Race Prepped & ready To Go

3 recent Shocks Factory shock absorbers

New brake disks, calipers, Pads and master cylinders joints, Venhill Cables, 3 X New Tyres (Only completed 12 laps at Cadwell) at the beginning of the season

1070cc engine, Jim Cray heads, special pistons, Siebenrock rods, resized camshaft, lightened crankshaft and balanced with the flywheel, racing clutch, NovaRacing gearbox reviewed 6 races ago, Ignitec electronic ignition system, Hard Wired Rev Counter, Racetech Oil Pressure & temperature Gauge Dell’Orto 40 carbs, dry sump completely rebuilt at the beginning of the season (new oil pump, new plate, Speedflow hose and fittings), 3 rear axles.
Recent Dyno Sheet Available.
Immaculate Throughout & Maintained without looking at the expense – New paintwork

Finishing the 2021 French Classic Championship at the 3rd place (winner of the last round at Val de Vienne).

£21,000 or Very Nearest Offer

Contact Rob Sirrell
robsirrell@yahoo.co.uk
+447885162400

f36b8060-89f1-45bf-84d3-6966a3aab707.jpg
f36b8060-89f1-45bf-84d3-6966a3aab707.jpg (143.91 KiB) Viewed 8776 times
36206a36-6329-46a6-9653-fe5d4287e466.jpg
36206a36-6329-46a6-9653-fe5d4287e466.jpg (153.33 KiB) Viewed 8776 times
4dcada23-f3ca-40ea-9e08-3a0cbf42dec6.jpg
4dcada23-f3ca-40ea-9e08-3a0cbf42dec6.jpg (147.54 KiB) Viewed 8776 times
198539f2-e174-4cef-8635-075acc722537.jpg
198539f2-e174-4cef-8635-075acc722537.jpg (81.9 KiB) Viewed 8776 times
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
robsirrell
In Collection Area
Posts: 2
Joined: Mon Jun 12, 2023 12:04 pm
D/P/T/M/S: Driver
Full Name: Mr Robert sirrell

Re: Classic 13“ BMW, chassis made by Tony Baker

Unread post by robsirrell »

Now Reduced to £21'000
#147racing
In Collection Area
Posts: 4
Joined: Wed Feb 09, 2022 2:37 pm
D/P/T/M/S: Driver
Full Name: David J Lissaman

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Unread post by #147racing »

Be interested in seeing the dyno charts
robsirrell
In Collection Area
Posts: 2
Joined: Mon Jun 12, 2023 12:04 pm
D/P/T/M/S: Driver
Full Name: Mr Robert sirrell

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Unread post by robsirrell »

Hi Got dyno sheets available for potential buyer
#147racing
In Collection Area
Posts: 4
Joined: Wed Feb 09, 2022 2:37 pm
D/P/T/M/S: Driver
Full Name: David J Lissaman

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Unread post by #147racing »

Could you send them to djlissaman@gmail.com
Wjpierce
In Collection Area
Posts: 5
Joined: Wed Mar 27, 2024 5:01 am
D/P/T/M/S: Driver
Full Name: William Pierce
Contact:

Re: Classic 13“ BMW, chassis made by Tony Baker - reduced to £21k

Unread post by Wjpierce »

Still Available? Sent an email. Bill Pierce
Post Reply