RACING BITS AND BOBS (mostly)
Posted: Wed May 07, 2025 9:00 pm
Clearing stuff from our garage. Hoping to raise some money for our local hospice (Arthur Rank):
Set of 4 expansion chambers and stingers made for a Krauser 500 (Yamaha mechanical exhaust power valve cylinders) fitted to a conventional Ireson chassis, plus 5 more stingers and springs.
Set of 4 flat slide 38mm bore Mikuni carbs from a Krauser 500 - used. 2 appear to have minor repairs on carb bodies plus 2 electric fuel pumps (which run when power applied) and a pressure regulator (untested) carried as spares.
Used carbon fibre passenger platform believed to be from a 2013 RCN long chassis. Good usable condition
Mocal oil cooler - new.
Water radiator - off a long a LCR. Used
Paint sprayer, buffer and paint kit. Spray guns, large and small, and one other.
Infrared thermometer.
Helicoils kits M5, mate, M10.
4 small axle stands (one pair Halfords)
Tyre pressure gauge
Tap and die set.
Heat gun.
Small generator 780w petroleum
Compressor ADAC Italy (air regulator).
Socket sets, English 1/2” drive (one missing but may yet turn up) and metric.
Box of power tools (various) - buffer, mouse, soldering iron.
Metal tool chest on wheels, lockable with key
Grey metal 2 door cabinet with shelf.
Workshop trolley, 3 shelf
Red “Snap on” tool box, lockable with key
Air impact gun and sockets SIP as new, boxed - air operated.
Fuel filler cap.
Box of metric tools, spanners/odd loose sockets
Box of imperial tools, spanners/odd loose sockets, torque wrench with 1/2 and 1/4 inch drives
Box of miscellaneous tools, screw drivers, pliers, mole grips, hammers, Yamaha adjustable clutch locking tool, oil filter removal/fitting tools etc
Offers please - pm
George Salmon
Set of 4 expansion chambers and stingers made for a Krauser 500 (Yamaha mechanical exhaust power valve cylinders) fitted to a conventional Ireson chassis, plus 5 more stingers and springs.
Set of 4 flat slide 38mm bore Mikuni carbs from a Krauser 500 - used. 2 appear to have minor repairs on carb bodies plus 2 electric fuel pumps (which run when power applied) and a pressure regulator (untested) carried as spares.
Used carbon fibre passenger platform believed to be from a 2013 RCN long chassis. Good usable condition
Mocal oil cooler - new.
Water radiator - off a long a LCR. Used
Paint sprayer, buffer and paint kit. Spray guns, large and small, and one other.
Infrared thermometer.
Helicoils kits M5, mate, M10.
4 small axle stands (one pair Halfords)
Tyre pressure gauge
Tap and die set.
Heat gun.
Small generator 780w petroleum
Compressor ADAC Italy (air regulator).
Socket sets, English 1/2” drive (one missing but may yet turn up) and metric.
Box of power tools (various) - buffer, mouse, soldering iron.
Metal tool chest on wheels, lockable with key
Grey metal 2 door cabinet with shelf.
Workshop trolley, 3 shelf
Red “Snap on” tool box, lockable with key
Air impact gun and sockets SIP as new, boxed - air operated.
Fuel filler cap.
Box of metric tools, spanners/odd loose sockets
Box of imperial tools, spanners/odd loose sockets, torque wrench with 1/2 and 1/4 inch drives
Box of miscellaneous tools, screw drivers, pliers, mole grips, hammers, Yamaha adjustable clutch locking tool, oil filter removal/fitting tools etc
Offers please - pm
George Salmon