Hi All, Some video of us, and our fellow competitors from Cadwell:
Tripebrew on Youtube
-
Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Tripebrew on Youtube
2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Re: Tripebrew on Youtube
RP wrote:Aye oop! No chicaneand are you using the go-kart circuit?
RP get your eyes tested
we were using the chicane and it was the full circuit 
2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
RP
- Endangered Species - I watched England win the Soccer World Cup
- Posts: 637
- Joined: Wed Jun 14, 2006 6:48 pm
- D/P/T/M/S: Classic driver
- Full Name: Roly Pickett
- Twitter: rolandpickett
- Location: England (most of the time).
- Contact:
Re: Tripebrew on Youtube
Must be the camera lens - that run out of the chicane to the mountain looks a lot longer 
-
Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Re: Tripebrew on Youtube
Could be down to speedRP wrote:Must be the camera lens - that run out of the chicane to the mountain looks a lot longer
2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
johnc
- Fired Up
- Posts: 43
- Joined: Sun Sep 13, 2009 9:08 pm
- D/P/T/M/S: ex D & P.
- Full Name: John carter
- Location: Bedford
Re: Tripebrew on Youtube
Who`s????
-
Mart6
- Fired Up
- Posts: 36
- Joined: Fri Sep 11, 2009 7:39 am
- D/P/T/M/S: Teaboy
- Full Name: Mart
- Location: Nr Mansfield
Re: Tripebrew on Youtube
Triplebrew
have you seen some of George Pooley's engines ?
Triumph quadrent 4 cyl also a 1500cc V6
Believe he has twin cam triumph that revs to 13k
and it runs on drum brakes.
More for show scene but intresting just the same
Article on Quadrent here
http://www.motorcycleclassics.com/motor ... drent.aspx
have you seen some of George Pooley's engines ?
Triumph quadrent 4 cyl also a 1500cc V6
Believe he has twin cam triumph that revs to 13k
and it runs on drum brakes.
More for show scene but intresting just the same
Article on Quadrent here
http://www.motorcycleclassics.com/motor ... drent.aspx
-
Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Re: Tripebrew on Youtube
Yep. Seen them at Beezumph - top bloke and great what he does Not sure we could get a V6 in the chassis mind He had a OHC bike this year and that looked very interesting - wonder if it will produce anymore power. The factory tried but found after initial tests it produce no more power than the OHV engine
Not sure we could get a V6 in the chassis mind He had a OHC bike this year and that looked very interesting - wonder if it will produce anymore power. The factory tried but found after initial tests it produce no more power than the OHV engine2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
Mart6
- Fired Up
- Posts: 36
- Joined: Fri Sep 11, 2009 7:39 am
- D/P/T/M/S: Teaboy
- Full Name: Mart
- Location: Nr Mansfield
Re: Tripebrew on Youtube
Funny you should say that, i went down D&D Engineering today and guess who popped into have some welding done. George himself, Dave Smith does his welding.
Had a long chat tried to buy BSA with belt driven twin cam engined bike, he would not sell it at any price.
He went and got me a few photos for a project im working on and this was in them-
Heres photo of v6 fitted in frame
He lathed crank himself out of billet steel block showed me photos
Also told me a bit about new project his words were "its going to fly"
Mentioned NEC think hes taking a few bikes.
talented guy for sure
Had a long chat tried to buy BSA with belt driven twin cam engined bike, he would not sell it at any price.
He went and got me a few photos for a project im working on and this was in them-
Heres photo of v6 fitted in frame
He lathed crank himself out of billet steel block showed me photos
Also told me a bit about new project his words were "its going to fly"
Mentioned NEC think hes taking a few bikes.
talented guy for sure