Imp stuff?
-
Simon Smith
- Throttle on the Stop
- Posts: 592
- Joined: Tue Jan 15, 2008 9:16 pm
- D/P/T/M/S: Driver
- Full Name: Simon Smith
- Twitter: @simonsmithno92
- Location: Solihull, West Midlands
- Contact:
Re: Imp stuff?
I've just ordered all of the bits for a complete engine rebuild from Reg. Shells, gaskets, seals, piston rings, valve springs, timing chain, wills rings and big end bolts came to just over £400. The engine should last a full season for that (fingers crossed).
No 92
F2 Sidecar Race Team
http://WWW.FPARACING.CO.UK
http://WWW.CALEBSMITHRACING.CO.UK
F2 Sidecar Race Team
http://WWW.FPARACING.CO.UK
http://WWW.CALEBSMITHRACING.CO.UK
-
NickR
- Setting the Fastest Lap
- Posts: 299
- Joined: Wed Sep 10, 2008 6:21 pm
- D/P/T/M/S: Driver
- Full Name: Nick Robinson
- Location: Sheffield
- Contact:
Re: Imp stuff?
http://cgi.ebay.co.uk/Rare-1200cc-Long- ... 2a040e9960" onclick="window.open(this.href);return false;
http://www.ontheedgeracing.com" onclick="window.open(this.href);return false;
-
Triplebrew
- Sniffing a Victory
- Posts: 1030
- Joined: Mon Jun 26, 2006 3:49 pm
- D/P/T/M/S: Ballast
- Full Name: Ian Tapsell
- Location: Kent
- Contact:
Re: Imp stuff?
our Trident motor didn't cost that much (not quite 
). Wonder what it would go like in an outfit. Gonna have a go at that Nick 
2011 MR Equipe Trident
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
It's A Triple Thing!
http://www.triplebrewracing.co.uk"
To finish first, first you must finish.
-
NickR
- Setting the Fastest Lap
- Posts: 299
- Joined: Wed Sep 10, 2008 6:21 pm
- D/P/T/M/S: Driver
- Full Name: Nick Robinson
- Location: Sheffield
- Contact:
Re: Imp stuff?
":o our Trident motor didn't cost that much (not quite )."
To have an Imp engine built to the spec of the one we ran last year would be about 6 and a half grand........so 7 for that one's probably not far off of the mark.
"Wonder what it would go like in an outfit. "
Very similar to Ed's I would imagine, although I'm pretty sure his isn't dry sumped though.
Gonna have a go at that Nick
I've already got 2 engines...........and more to the point, Shelli won't sign off on it!
)." To have an Imp engine built to the spec of the one we ran last year would be about 6 and a half grand........so 7 for that one's probably not far off of the mark.
"Wonder what it would go like in an outfit. "
Very similar to Ed's I would imagine, although I'm pretty sure his isn't dry sumped though.
Gonna have a go at that Nick
I've already got 2 engines...........and more to the point, Shelli won't sign off on it!
http://www.ontheedgeracing.com" onclick="window.open(this.href);return false;