Konny and Konig engines

Classic and Vintage outfit discussion, including Where are they now, the people hunter.
User avatar
sidecar bloke
Setting the Fastest Lap
Posts: 221
Joined: Sat Apr 25, 2009 7:29 pm
D/P/T/M/S: Sidecar driver
Full Name: Ian Johnson
Location: Farnborough, Hants

Re: Konny and Konig engines

Unread post by sidecar bloke »

I really can't be bothered to scroll back 13 pages, but if my memory (which some may question) serves me well, after Dick's dispassionate piece I would surely have said that we, who are fortunate enough to race classic sidecars with the Classic Club, have had a fantastic year, whether on the track with 36 fellow competitors, at the Gristwood BBQ, or the karaoke at Pembrey - we have had a great year - see I've even forgotten the Race of the Year at Silverstone with the band Saturday night! We have enjoyed each others company on and off the circuit.

Due to lack of machinery in 2012 I personally failed to get to Belgium but spent the day in the garage today with Kevin, my passenger, polishing the outfit ready for next season. So hopefully next year we will do the CRMC rounds, Chimay and Gedinne (and if I get an entry - some Camathias rounds). Not because any one is better than any other - they're all different - just for the joy of racing! Trust me I didn't become Chairman of the CRMC as an ego trip but to defend and further sidecar racing in the club.

As far as Howard's Konig is concerned I received a very nice letter from Howard over Christmas, and we - that's Howard and myself, will proceed in private.

The only worthy response to Dick's last posting - 5' 10". Hope that helps.

In response to Raring to Go - who I wish well with his beautiful engines, - I've been trying to pursuade a gentleman who has an original twin-engined Crescent outfit, to get it out of the workshop and on the track. It's a bit like the 750's having their own grid in the CRMC - we're getting there, but slowly.

As I've said before - we are having a ball at the CRMC - if you have a classic outfit come and join us. And I think it's time that Richard started to talk to his wife again - so Steve pull the pin!

Ian
richard
Scything Through The Field
Posts: 123
Joined: Thu Jan 04, 2007 12:08 am
Location: essex

Re: Konny and Konig engines

Unread post by richard »

Bum. Gill, Gill remember me
gatekeeper
Setting the Fastest Lap
Posts: 233
Joined: Tue Jul 31, 2007 6:51 am
D/P/T/M/S: dodgy driver
Full Name: ian[gatey]derbyshire
Location: sunny heanor but its raining

Re: Konny and Konig engines

Unread post by gatekeeper »

RARING TO GO wrote:If we allow this thread to go back to the begining we may be supprised at how some people may change what they have said in the past, so let it roll along.
BTW Gate keeper I have a brand new in the box unused 1963 Crescent engine.
oooooooo
just one more lap and i'll have him
User avatar
dick hawes
Setting the Fastest Lap
Posts: 231
Joined: Wed Apr 18, 2007 7:24 pm
D/P/T/M/S: DRIVER
Full Name: DICK HAWES
Location: i.o.m

Re: Konny and Konig engines

Unread post by dick hawes »

Ian... you are very welcome in the Camathias Cup.

Happy New Year :beer:
User avatar
Wal
Setting the Fastest Lap
Posts: 202
Joined: Fri Jun 16, 2006 8:04 am
D/P/T/M/S: Driver/Teaboy
Full Name: Wally Saunders
Location: Isle of Man
Contact:

Re: Konny and Konig engines

Unread post by Wal »

RARING TO GO, you have pm
I don’t regret the things I did wrong, I do regret the things I did right. . .for the wrong people !

Image
RARING TO GO
Setting the Fastest Lap
Posts: 211
Joined: Fri Jul 29, 2011 7:58 am
D/P/T/M/S: D
Full Name: michel Duneige
Location: Santa Cruz Bolivia

Re: Konny and Konig engines

Unread post by RARING TO GO »

Well Howard in secret talks with Ian, has to be a bonus from this saga.
RARING TO GO
Setting the Fastest Lap
Posts: 211
Joined: Fri Jul 29, 2011 7:58 am
D/P/T/M/S: D
Full Name: michel Duneige
Location: Santa Cruz Bolivia

Re: Konny and Konig engines

Unread post by RARING TO GO »

RARING TO GO wrote:Well Howard in secret talks with Ian, has to be a bonus from this saga.
Wal ,read it and tks.
User avatar
steve-e
Site Admin
Posts: 8943
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:

Re: Konny and Konig engines

Unread post by steve-e »

Gentlemen, thank you for an interesting and almost informative thread :D
As you can tell the Mods haven't locked, I'm sure Ian is cursing us for it but I think on the quiet is loving the attention :lol: The moderators have taken the view that you are all gentlemen who know each other and would do exactly the same in any bar at any circuit you happened to be at in good humour and faith so to moderate would be like having the landlord kicking asking if you had homes to go to and ruining the evening ;)

If there ARE any real grievances, either keep them to yourselves or put them through the appropriate moderating channelsm - I'm sure you have all read the Rules of Engagement before stepping into the fray of course ;)

I would personally like to congratulate you all on the good humour, and keeping so many entertained for so long in the winter months, and at 13 pages we're just getting started :beer:
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
richard
Scything Through The Field
Posts: 123
Joined: Thu Jan 04, 2007 12:08 am
Location: essex

Re: Konny and Konig engines

Unread post by richard »

But,but I just said i'll go late night shopping,great thats what you get for talking.
User avatar
Eddy Wright
Throttle on the Stop
Posts: 644
Joined: Wed Sep 20, 2006 4:01 pm
D/P/T/M/S: Driver
Full Name: Eddy Wright
Location: North Yorkshire
Contact:

Re: Konny and Konig engines

Unread post by Eddy Wright »

Richard your such a southern tosser, but I like you !
Eddy Wright
Free Styler
richard
Scything Through The Field
Posts: 123
Joined: Thu Jan 04, 2007 12:08 am
Location: essex

Re: Konny and Konig engines

Unread post by richard »

Thats not what you said in the past, anyway i come from Essex and in most peoples eyes thats worse than being a tosser. anyway have a good year and be safe
RARING TO GO
Setting the Fastest Lap
Posts: 211
Joined: Fri Jul 29, 2011 7:58 am
D/P/T/M/S: D
Full Name: michel Duneige
Location: Santa Cruz Bolivia

Re: Konny and Konig engines

Unread post by RARING TO GO »

Richard, for what its worth, In my book anyone who shows interest (positive) in a Konny is not a tosser. :lol: :lol: :lol: :offtopic:
Last edited by RARING TO GO on Mon Dec 31, 2012 2:20 pm, edited 1 time in total.
tonybsa2008
Lapping the Tail Enders
Posts: 335
Joined: Fri Apr 08, 2011 9:06 pm
D/P/T/M/S: driver
Full Name: tony wheatley

Re: Konny and Konig engines

Unread post by tonybsa2008 »

One quick question fo Ian,eligibility bloke.Why 5" 10",why not 5" 13"?
User avatar
sidecar bloke
Setting the Fastest Lap
Posts: 221
Joined: Sat Apr 25, 2009 7:29 pm
D/P/T/M/S: Sidecar driver
Full Name: Ian Johnson
Location: Farnborough, Hants

Re: Konny and Konig engines

Unread post by sidecar bloke »

Hi Tony,

The 5 has a tolerance of plus or minus .5 giving a maximum of 5.5

The 10 is ideal for a Yokahama, good in the wet, good in the dry.

Part 2 - 5 has a similar tolerance of .5 giving a maximum of 5.5

The 13 is ideal for an Avon, according to some not as good in the wet but good in the dry.

So looking out the window if this continues for the rest of the year I'd go for 5' 10" :lol: :lol:

Ian
User avatar
sidecar bloke
Setting the Fastest Lap
Posts: 221
Joined: Sat Apr 25, 2009 7:29 pm
D/P/T/M/S: Sidecar driver
Full Name: Ian Johnson
Location: Farnborough, Hants

Re: Konny and Konig engines

Unread post by sidecar bloke »

I'd like to wish everyone who has raced a classic sidecar in the Classic Club a very Happy New Year and successful 2013 season.

Ian Johnson
Post Reply