10" chair

For Results,please see the timekeeper's office next door! To register, click the link in the top right corner.
User avatar
powerhouse
Setting the Fastest Lap
Posts: 259
Joined: Sun Aug 31, 2008 10:02 pm
D/P/T/M/S: driver
Full Name: brian ilaria
Location: derby

10" chair

Unread post by powerhouse »

Did it cost dave the win?
better cornering at the cost of flat speed?
What's your feelings
We broke something, I think it was traction….........


www.powerhouseturbo.com
http://www.goodwintanks.co.uk
User avatar
steve-e
Site Admin
Posts: 8920
Joined: Wed Jun 14, 2006 6:12 pm
D/P/T/M/S: resting Passenger
Full Name: Steve English
Skype contact: steveenglish.com
Twitter: @steveinmarden
Location: Marden, Kent
Contact:

Re: 10" chair

Unread post by steve-e »

That wouldn't affect top end noticeably I would say.
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
User avatar
Lee Barrett
Fired Up
Posts: 29
Joined: Thu Dec 27, 2007 9:42 pm
D/P/T/M/S: passenger...
Location: kent

Re: 10" chair

Unread post by Lee Barrett »

steve-e wrote:That wouldn't affect top end noticeably I would say.
Agreed :D can't see it causing any more drag especially not 10mph.. Moly said himself its down on hp but had loads of torque
TEAM EDWARDS KAWASAKI 2013

Open your door pensioner for I am a bogus gas man with a fake id and I am here to ransack your HOOOSE.............
User avatar
williamsf2
One Lap Completed
Posts: 72
Joined: Thu Jun 15, 2006 12:18 am
D/P/T/M/S: d + p
Full Name: Matt + Jo Williams
Location: Roade, Northampton

Re: 10" chair

Unread post by williamsf2 »

Should'nt affect top speed,as chair will be set straight,no toe to scrub of speed, moly :notworthy: :notworthy: :notworthy:, Wednesday race2 ;)
Careful now!
User avatar
Richard Rollings
Throttle on the Stop
Posts: 540
Joined: Wed May 21, 2008 6:00 pm
D/P/T/M/S: driver/teaboy
Twitter: @madmille
Location: South Lincolnshire

Re: 10" chair

Unread post by Richard Rollings »

Maybe the way the Rad was mounted (brick wall) may have had a effect on top speed
DM.jpg
No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.
User avatar
Glenn
In Collection Area
Posts: 8
Joined: Wed Jun 14, 2006 11:10 pm
D/P/T/M/S: passenger
Full Name: Glenn Dawson
Location: Pocklington, York

Re: 10" chair

Unread post by Glenn »

His top speed was well down last year without that rad and 10 inch chair wheel so probably no difference.
User avatar
Sideslip
Scything Through The Field
Posts: 101
Joined: Tue Aug 26, 2008 10:31 pm
D/P/T/M/S: Ex driver F2

Re: 10" chair

Unread post by Sideslip »

Does anyone ever put an outfit in a wind tunnel? Most are about as aerodynamic as a brick, I should reckon. :?
Older - but none the wiser
User avatar
powerhouse
Setting the Fastest Lap
Posts: 259
Joined: Sun Aug 31, 2008 10:02 pm
D/P/T/M/S: driver
Full Name: brian ilaria
Location: derby

Re: 10" chair

Unread post by powerhouse »

Sideslip wrote:Does anyone ever put an outfit in a wind tunnel? Most are about as aerodynamic as a brick, I should reckon. :?
Think the birchalls had a fairing in a tunnel courtesy of a university(can't remember which one )probably Loughborough
We broke something, I think it was traction….........


www.powerhouseturbo.com
http://www.goodwintanks.co.uk
User avatar
Jeff
Fired Up
Posts: 42
Joined: Fri Jun 16, 2006 10:00 am
Full Name: Jeff Brown
Location: Sydney, Australia

Re: 10" chair

Unread post by Jeff »

I remember Moly taking his to the BAR Honda tunnel years ago. Probably after his 'Bluebird-like' flip.

Jeff

:gun:
User avatar
ianw
Opposite Lock Through the Chicanes
Posts: 923
Joined: Thu Jun 15, 2006 9:52 pm
Location: Wirral

Re: 10" chair

Unread post by ianw »

If I remember right, Trev Ireson & Derek Jones had one of Trevor's in a wind tunnel many years ago.
User avatar
ronno
Deletion Specialist
Posts: 1713
Joined: Wed Jun 14, 2006 8:15 pm
D/P/T/M/S: Teaboy/Tyre Delivery
Full Name: Terry Scott
Location: Nottingham
Contact:

Re: 10" chair

Unread post by ronno »

powerhouse wrote:
Sideslip wrote:Does anyone ever put an outfit in a wind tunnel? Most are about as aerodynamic as a brick, I should reckon. :?
Think the birchalls had a fairing in a tunnel courtesy of a university(can't remember which one )probably Loughborough
Only a few miles from Loughborough , Brian :)
http://www.birchallracing.com/leicester ... champions/
Somebody has just unloaded a ton of Play-Doh on my driveway! I don't know what to make of it !
Couperman
On the Starting Grid
Posts: 15
Joined: Thu Jun 15, 2006 10:46 am
D/P/T/M/S: Driver
Full Name: Andrew Couper
Location: East Fortune

Re: 10" chair

Unread post by Couperman »

Hi,
Did Steve Pullen not do a bit of wind tunnel stuff. ???
bruce moore
Lapping the Tail Enders
Posts: 423
Joined: Tue May 20, 2008 9:59 pm
D/P/T/M/S: Driver/Passenger
Full Name: Bruce Moore

Re: 10" chair

Unread post by bruce moore »

ianw wrote:If I remember right, Trev Ireson & Derek Jones had one of Trevor's in a wind tunnel many years ago.
your right ...... now everybody is turning there outfits into gods tractors,with there little beak on the front and diffuser's under the platform.
User avatar
ianw
Opposite Lock Through the Chicanes
Posts: 923
Joined: Thu Jun 15, 2006 9:52 pm
Location: Wirral

Re: 10" chair

Unread post by ianw »

:notworthy: to Trev.
User avatar
powerhouse
Setting the Fastest Lap
Posts: 259
Joined: Sun Aug 31, 2008 10:02 pm
D/P/T/M/S: driver
Full Name: brian ilaria
Location: derby

Re: 10" chair

Unread post by powerhouse »

ronno wrote:
powerhouse wrote:
Sideslip wrote:Does anyone ever put an outfit in a wind tunnel? Most are about as aerodynamic as a brick, I should reckon. :?
Think the birchalls had a fairing in a tunnel courtesy of a university(can't remember which one )probably Loughborough
Only a few miles from Loughborough , Brian :)
http://www.birchallracing.com/leicester ... champions/
Thankyou Terry :roll: :lol:
We broke something, I think it was traction….........


www.powerhouseturbo.com
http://www.goodwintanks.co.uk
Post Reply