could anybody please tell me the jet sizes & needle types for a 980cc BMW using dellorto PHM 40mm carbs. many thanks andy
andrew.bailey7@virgin.net
40mm PHM carbs
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
- NickR
- Setting the Fastest Lap
- Posts: 299
- Joined: Wed Sep 10, 2008 6:21 pm
- D/P/T/M/S: Driver
- Full Name: Nick Robinson
- Location: Sheffield
- Contact:
Re: 40mm PHM carbs
Have you asked Richard Moore?
He'd be my first port-of-call.
He'd be my first port-of-call.
http://www.ontheedgeracing.com" onclick="window.open(this.href);return false;
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
Re: 40mm PHM carbs
many thanks Nick i,ll give him a try.
- Wal
- Setting the Fastest Lap
- Posts: 202
- Joined: Fri Jun 16, 2006 8:04 am
- D/P/T/M/S: Driver/Teaboy
- Full Name: Wally Saunders
- Location: Isle of Man
- Contact:
Re: 40mm PHM carbs
Depending on your engine somewhere around 170 -175 would be a good place to start.
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
Re: 40mm PHM carbs
Many thanks Wally would you change the pilots as well?
- Wal
- Setting the Fastest Lap
- Posts: 202
- Joined: Fri Jun 16, 2006 8:04 am
- D/P/T/M/S: Driver/Teaboy
- Full Name: Wally Saunders
- Location: Isle of Man
- Contact:
Re: 40mm PHM carbs
Hi Andy, "change pilots" from . . . !!! that kinda depends on where you start . . !!