F350 Glass Fibre....
-
G JONES
- Lapping the Tail Enders
- Posts: 380
- Joined: Wed Jun 14, 2006 8:28 pm
- D/P/T/M/S: D
- Full Name: Gordon Jones
- Location: Shropshire
- Contact:
F350 Glass Fibre....
After months working on it - the first set out of the moulds - just need to finish the bike to fit it to now...
2 strokes are the future...
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
-
mervnoble
- Setting the Fastest Lap
- Posts: 250
- Joined: Sun Oct 26, 2008 12:46 pm
- D/P/T/M/S: Driver
- Full Name: Merv Noble
- Location: Newark, Notts, England
Re: F350 Glass Fibre....
Lousy colourG JONES wrote:After months working on it - the first set out of the moulds - just need to finish the bike to fit it to now...
Anyhow since 1957
Re: F350 Glass Fibre....
Looks alright Gordon !!!!!
-
smudge
- On the Starting Grid
- Posts: 22
- Joined: Wed Jun 13, 2007 7:52 pm
- D/P/T/M/S: passenger/driver
- Full Name: andy taylor
- Location: frodsham cheshire
Re: F350 Glass Fibre....
Looking good gord u cumin out tp play this year ????? 
if your not on the edge your takin up too much room!
-
G JONES
- Lapping the Tail Enders
- Posts: 380
- Joined: Wed Jun 14, 2006 8:28 pm
- D/P/T/M/S: D
- Full Name: Gordon Jones
- Location: Shropshire
- Contact:
Re: F350 Glass Fibre....
We're hoping tosmudge wrote:Looking good gord u cumin out tp play this year ?????
- although still lots to do - that Glassfibre has taken months - should have just gone & bought one - would have been quicker & a great deal cheaper - but then I'd still have wanted to modify it - so at least I have the changes to the shape I've been wanting for a long time - just pulled the passenger tray & airbox out of the mould too - next is the undertray We'll certainly not be at Oulton or Cadwell - Julie's having some trouble with one of her knees - so we pretty much decided it would be better to try & get that sorted - and use the extra time to try & get the new bike finished - rather than spend the time getting the old bike ready & looking for a passenger...(can't do everything unfortunately)
2 strokes are the future...
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
-
smudge
- On the Starting Grid
- Posts: 22
- Joined: Wed Jun 13, 2007 7:52 pm
- D/P/T/M/S: passenger/driver
- Full Name: andy taylor
- Location: frodsham cheshire
Re: F350 Glass Fibre....
Ok mate give julie all our best and hope to see you both soon
if your not on the edge your takin up too much room!
Re: F350 Glass Fibre....
Are you going to put some pictures up of the new outfit when it's finished Gordon!!!!
-
G JONES
- Lapping the Tail Enders
- Posts: 380
- Joined: Wed Jun 14, 2006 8:28 pm
- D/P/T/M/S: D
- Full Name: Gordon Jones
- Location: Shropshire
- Contact:
Re: F350 Glass Fibre....
With any luck - we hope to be at East Fortune later in the year - but if we by any chance get it ready to use any sooner....you'll be one of the first to knowACER wrote:Are you going to put some pictures up of the new outfit when it's finished Gordon!!!!
2 strokes are the future...
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
-
mcmaiering
- Fired Up
- Posts: 43
- Joined: Thu Jun 16, 2011 6:56 pm
- D/P/T/M/S: Passenger/T/M
- Full Name: Marc Maier
- Twitter: mcmaiering
- Location: Isle of Man
Re: F350 Glass Fibre....
Most importantly, will you be all set for Gedinne? Passenger and outfit?
Just because you're breathing, it doesn't mean you're alive...
-
G JONES
- Lapping the Tail Enders
- Posts: 380
- Joined: Wed Jun 14, 2006 8:28 pm
- D/P/T/M/S: D
- Full Name: Gordon Jones
- Location: Shropshire
- Contact:
Re: F350 Glass Fibre....
I'd like to think "both" - still got the good old Shelbourne - & Julie should be ok by then - with the large sidecar entry at Gedinne - don't think there'd be much trouble getting hold of a passenger....mcmaiering wrote:Most importantly, will you be all set for Gedinne? Passenger and outfit?
2 strokes are the future...
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
-
mervnoble
- Setting the Fastest Lap
- Posts: 250
- Joined: Sun Oct 26, 2008 12:46 pm
- D/P/T/M/S: Driver
- Full Name: Merv Noble
- Location: Newark, Notts, England
Re: F350 Glass Fibre....
I'll ask my mum if she is free that weekend...........................................G JONES wrote:I'd like to think "both" - still got the good old Shelbourne - & Julie should be ok by then - with the large sidecar entry at Gedinne - don't think there'd be much trouble getting hold of a passenger....mcmaiering wrote:Most importantly, will you be all set for Gedinne? Passenger and outfit?
Anyhow since 1957
-
G JONES
- Lapping the Tail Enders
- Posts: 380
- Joined: Wed Jun 14, 2006 8:28 pm
- D/P/T/M/S: D
- Full Name: Gordon Jones
- Location: Shropshire
- Contact:
Re: F350 Glass Fibre....
You're all heart Mr Noble - really appreciate that - has she got leather available ?mervnoble wrote:I'll ask my mum if she is free that weekend...........................................
2 strokes are the future...
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
TZ Parts List
http://tz350.co.uk
Had to laugh at this I heard somewhere... "You can't polish a Turd"
-
bruce moore
- Lapping the Tail Enders
- Posts: 423
- Joined: Tue May 20, 2008 9:59 pm
- D/P/T/M/S: Driver/Passenger
- Full Name: Bruce Moore
Re: F350 Glass Fibre....
Best get my licence Gordon ,