Who's disk? 81 Fiddaman
- tintop
- On the Starting Grid
- Posts: 22
- Joined: Thu Sep 29, 2011 2:32 am
- D/P/T/M/S: driver
- Full Name: Brian Robinson
- Location: Canada
Who's disk? 81 Fiddaman
Anyone know where the ventilated front rotor was sourced for the 81 Fiddaman? It used an automotive Lockheed caliper.
-
- Setting the Fastest Lap
- Posts: 211
- Joined: Fri Jul 29, 2011 7:58 am
- D/P/T/M/S: D
- Full Name: michel Duneige
- Location: Santa Cruz Bolivia
Re: Who's disk? 81 Fiddaman
It was I understand a Ford Grenada
- tintop
- On the Starting Grid
- Posts: 22
- Joined: Thu Sep 29, 2011 2:32 am
- D/P/T/M/S: driver
- Full Name: Brian Robinson
- Location: Canada
Re: Who's disk? 81 Fiddaman
Thanks, will follow-up on that.
- tintop
- On the Starting Grid
- Posts: 22
- Joined: Thu Sep 29, 2011 2:32 am
- D/P/T/M/S: driver
- Full Name: Brian Robinson
- Location: Canada
Re: Who's disk? 81 Fiddaman
Well it's not a Granada rotor. They are 5 bolt from what I can find, and this is 6 bolt. Any other suggestions??RARING TO GO wrote:It was I understand a Ford Grenada
Pics coming
- steve-e
- Site Admin
- Posts: 8920
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: Who's disk? 81 Fiddaman
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember
Re: Who's disk? 81 Fiddaman
Ford Sierra?
-
- Fired Up
- Posts: 29
- Joined: Mon Feb 25, 2008 6:58 pm
- D/P/T/M/S: driver
- Full Name: ralph remnant
- Location: highbridge
- Contact:
Re: Who's disk? 81 Fiddaman
Lockheed disc from a early
formula 3 car ? try looking on the AP Racing website
formula 3 car ? try looking on the AP Racing website
Three wheels on my wagon
- tintop
- On the Starting Grid
- Posts: 22
- Joined: Thu Sep 29, 2011 2:32 am
- D/P/T/M/S: driver
- Full Name: Brian Robinson
- Location: Canada
Re: Who's disk? 81 Fiddaman
no luck so far, any other suggestions??
-
- In Collection Area
- Posts: 9
- Joined: Mon Oct 23, 2006 12:13 pm
- Location: leiden, holland
- Contact:
Re: Who's disk? 81 Fiddaman
As far as I know it is a Granada rotor. Forget about the 5 bolt holes, that bit is cut off anyway. The Granada rotor needs to be machined to fit your outfit. The slots and holes in the rotor shown in Steve's pictures are not standard. Early LCR's also used Granada rotors. I used rotors from a Citroen CX on my outfits, the outer diameter was similar to the Granada rotor but on the inside there was a bit more "meat" to play with.
- WEBBO
- On the Starting Grid
- Posts: 24
- Joined: Sun Jun 18, 2006 4:35 pm
- D/P/T/M/S: Ex Driver
- Full Name: Steve Webster
- Location: Easingwold Yorkshire
Re: Who's disk? 81 Fiddaman
I think a few lads used ford transit discs to start with, then machined them to suit. hope that helps.
- tintop
- On the Starting Grid
- Posts: 22
- Joined: Thu Sep 29, 2011 2:32 am
- D/P/T/M/S: driver
- Full Name: Brian Robinson
- Location: Canada
Re: Who's disk? 81 Fiddaman
Thanks for another lead Steve, will check into the Transit rotors.