Copper nuts
-
Flash22
- In Collection Area
- Posts: 5
- Joined: Mon May 25, 2015 9:21 pm
- D/P/T/M/S: Driver
- Full Name: Jamie masterson
- Twitter: @flashracing22
Copper nuts
Can anyone tell what the advantage is in using copper nuts? Or will stainless nylon locknuts do the same job?? Cheers in advance
Go Big or Go Home
-
Eurocup
- Setting the Fastest Lap
- Posts: 260
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: Copper nuts
Hi
the steel nuts with cooper surface are heat resistance. If the nut gets hot at breaks etc. nylon can melt, the safety is gone.
bye Eckart
the steel nuts with cooper surface are heat resistance. If the nut gets hot at breaks etc. nylon can melt, the safety is gone.
bye Eckart
-
Dan
- Lapping the Tail Enders
- Posts: 368
- Joined: Fri Jun 16, 2006 1:13 pm
- D/P/T/M/S: Driver - injured
- Location: Halifax, West Yorkshire
Re: Copper nuts
When I saw the heading I thought it was going to be something about ginger haired men 
Proud and honoured to be a member of Team Past It.
With age comes wisdom, maturity and responsibility.............unless you race sidecars !
With age comes wisdom, maturity and responsibility.............unless you race sidecars !