Hi I’m looking for a windle back axel if anyone has 1 or knows where I could get1
Also if anyone has got 1made before could you point me in the right direction as to where I could go to get 1 made ASAP
Wanted Windle back drive axel
-
McNally 85
- In Collection Area
- Posts: 4
- Joined: Tue Dec 12, 2017 12:29 am
- D/P/T/M/S: Driver
- Full Name: Philip Mc Nally
-
dick tapken
- Lapping the Tail Enders
- Posts: 372
- Joined: Wed Jun 14, 2006 7:54 pm
- D/P/T/M/S: driver
Re: Wanted Windle back drive axel
dave cheeseman
-
Eurocup
- Setting the Fastest Lap
- Posts: 260
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: Wanted Windle back drive axel
Hi
there are two types around. May be send me a picture. I guy in germany made some, i used it 2 years without any problems and it fittet very good. His price was euro 350.- I will give you his contact.
Bye Eckart
there are two types around. May be send me a picture. I guy in germany made some, i used it 2 years without any problems and it fittet very good. His price was euro 350.- I will give you his contact.
Bye Eckart
Re: Wanted Windle back drive axel
seem to recall making one up for our windle F1 ,we used a VW type2 van rear stub axel as a base which I think is what Terry used there is some other work required but is doable with the use of a lathe .
-
Eurocup
- Setting the Fastest Lap
- Posts: 260
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: Wanted Windle back drive axel
sorry F1 or F2? i am talking about F2 .
Bye Eckart
Bye Eckart
Re: Wanted Windle back drive axel
Windle 2000 F1