Hello Everybody,
i has to repair my Shelbourne fairing.
I want to repair the fairing with carbon fiber textile and resin.
Did anybody has an idea witch carbon fiber density is the proven in terms of processing and stability? ( 68g/m³ - 400g/m³)
Thanks in advance
Fairing repair
-
Bornracing
- On the Starting Grid
- Posts: 14
- Joined: Mon Oct 23, 2006 1:43 pm
- D/P/T/M/S: Driver
- Full Name: Bastian Born
- Location: Germany
- Contact:
-
Fanch
- Sniffing a Victory
- Posts: 1114
- Joined: Mon Jul 03, 2006 1:17 pm
- D/P/T/M/S: S
- Full Name: Francois BEAUCHAMPS
- Location: Brittany
Re: Fairing repair
On the Continent and not so far from Germany
Harrald Endeveld
mobile +31 627 191 057
info@hp-sidecarparts.eu
www.hp-sidecarparts.eu
Harrald Endeveld
mobile +31 627 191 057
info@hp-sidecarparts.eu
www.hp-sidecarparts.eu
En Bretagne, on dit qu'il pleut souvent, mais la pluie ne mouille que les cons !!
Always Look on the Bright Side of Life
Always Look on the Bright Side of Life
-
CornishKirk
- One Lap Completed
- Posts: 52
- Joined: Thu Apr 12, 2007 9:45 pm
- D/P/T/M/S: Driver/passenger
- Full Name: Martin Kirk
- Location: Cornwall/Midlands
- Contact:
Re: Fairing repair
I use carbon Kevlar 2/2 twill 210g with polyester resin.
Straight carbon fibre tends to be a bit too brittle for fairings
Straight carbon fibre tends to be a bit too brittle for fairings
Power is Nothing without Control.....and A Good Passenger
www.mkracing58.com
www.mkracing58.com
-
Bornracing
- On the Starting Grid
- Posts: 14
- Joined: Mon Oct 23, 2006 1:43 pm
- D/P/T/M/S: Driver
- Full Name: Bastian Born
- Location: Germany
- Contact:
Re: Fairing repair
massive thanks for your input.
A new element in discussion, i have some opportunities to use a autoclave and some carbonfibre prepreg's.
Did you think a fairing inside a autoclave stays stable in therms of dimension? Or do you think the hole fairing collapse around 180°C ?!
A new element in discussion, i have some opportunities to use a autoclave and some carbonfibre prepreg's.
Did you think a fairing inside a autoclave stays stable in therms of dimension? Or do you think the hole fairing collapse around 180°C ?!