R6 Rev counter HELP
R6 Rev counter HELP
I'm trying to wire up my rev counter and I cant find my Manual, Standard carb model one. My old one has 4 wires used I know the yellow and black is signal, That leaves white, black and brown, presuming one is pos, one is neg what is the other one, Can anyone help me please?
Thanks Alanw
Thanks Alanw
-
- Setting the Fastest Lap
- Posts: 233
- Joined: Tue Jul 31, 2007 6:51 am
- D/P/T/M/S: dodgy driver
- Full Name: ian[gatey]derbyshire
- Location: sunny heanor but its raining
Re: R6 Rev counter HELP
black = earth---brown is a constant pos---white goes to the speed sensor ---if i remember right that is and yelloow and black is the sensor wire from the ecu
just one more lap and i'll have him
Re: R6 Rev counter HELP
Yea your right Ian, I've now found my manual and am sorted. Thanks.
Alanw
Alanw

-
- Setting the Fastest Lap
- Posts: 233
- Joined: Tue Jul 31, 2007 6:51 am
- D/P/T/M/S: dodgy driver
- Full Name: ian[gatey]derbyshire
- Location: sunny heanor but its raining
Re: R6 Rev counter HELP
Right Ive wired it up and its only working intermitently, the old one was the same. (thats why I got a new one). I've tried another igniter unit and its still the same. Is it something to do with running total loss ignition, and not having enough voltage for some reason?
Alanw
Alanw
- craig hauxwell
- One Lap Completed
- Posts: 82
- Joined: Thu May 22, 2008 12:00 am
- D/P/T/M/S: DRIVER
- Full Name: craig hauxwell
- Location: wirral
Re: R6 Rev counter HELP
It's only working intermitently because the throttle position sensor is either not wired / disconected or faulty.The sensor must be conected for the rev counter to work properly otherwise it goes into Fault find mode and the fault it is showing is the sensor.I trust it is working on occasion then only running from 0 rpm to 4000/5000 rpm.
- Richard Rollings
- Throttle on the Stop
- Posts: 540
- Joined: Wed May 21, 2008 6:00 pm
- D/P/T/M/S: driver/teaboy
- Twitter: @madmille
- Location: South Lincolnshire
Re: R6 Rev counter HELP
There used to be manuals in the download section but they seem to have disappeared.
No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.
- steve-e
- Site Admin
- Posts: 8920
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: R6 Rev counter HELP
Sorry Richard! Renamed the category to 'Documentation' as I added stuff that wasn't a manual but kind of fitted in.
Service Manual downloads here --> http://www.steveenglish.com/index.php?o ... &Itemid=85
Service Manual downloads here --> http://www.steveenglish.com/index.php?o ... &Itemid=85
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember
Re: R6 Rev counter HELP
Graig.
How are ya mate?
I dont have the sensor wired to this one, but it was on the last one and did exactly the same. I wil try it again.
Cheers
How are ya mate?
I dont have the sensor wired to this one, but it was on the last one and did exactly the same. I wil try it again.
Cheers
- craig hauxwell
- One Lap Completed
- Posts: 82
- Joined: Thu May 22, 2008 12:00 am
- D/P/T/M/S: DRIVER
- Full Name: craig hauxwell
- Location: wirral
Re: R6 Rev counter HELP
Am fine Alan mate and you ?
if you dont have a thottle position sensor fitted mate the tacho will never work properly so that may have gone faulty causing the problem with your old one.It doesnt have to work as intended but must be fitted in order for the tacho to work properly.Just set the position sensor to 6000 rpm and lock it up and that will do nicely then your tacho should work properly.If you need any help how to set it up just pm me and i will send you the info on how to do it.I'ts quite easy to do
if you dont have a thottle position sensor fitted mate the tacho will never work properly so that may have gone faulty causing the problem with your old one.It doesnt have to work as intended but must be fitted in order for the tacho to work properly.Just set the position sensor to 6000 rpm and lock it up and that will do nicely then your tacho should work properly.If you need any help how to set it up just pm me and i will send you the info on how to do it.I'ts quite easy to do
Re: R6 Rev counter HELP
Graig
Just got back from S 100 didnt have much time to look at rev counter, will try the throtle position sensor,
Regards
Alanw
Just got back from S 100 didnt have much time to look at rev counter, will try the throtle position sensor,
Regards
Alanw
Re: R6 Rev counter HELP
Hey, I had the exact same problem! I found it was the sensor on the keihin flatslides that was giving it the error, couldnt fix it so got a AIM mychron4 dash and wired it up. No more dramas!