
CBR Ignition for 2-Stroke
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
CBR Ignition for 2-Stroke
has anybody tried to use 4-Stroke electronic ignition (with a wasted spark) on a twin cyl 2-Stroke I know it,s a stupid question to ask got loads of Honda 600 ignitions thought I'd try it on a T500 twin cheers 

Re: CBR Ignition for 2-Stroke
Hi Andy,there is no doubt that the Honda CBR ignition system would work on your Suzuki T500. The problem would be in reprograming the ignitor box, the Honda has a full advance curve, but the two stroke would at the least need a static setting, or preferably a slight advance with a steady retard as it approaches high RPM. Without this a seizure or a holed piston would be very likely, hope this helps. Hope you and Tony are both well, who is riding the new bike , you or Tony ?
-
- Fired Up
- Posts: 41
- Joined: Mon Feb 09, 2009 11:39 pm
- Full Name: Andrew Bailey
Re: CBR Ignition for 2-Stroke
thanks for that Howard I knew there would be somebody on here clever enough to say don,t waste your time if or hopefully when it,s ready I think
father will have a go .
father will have a go .