CBR Ignition for 2-Stroke

For Results,please see the timekeeper's office next door! To register, click the link in the top right corner.
andy bailey
Fired Up
Posts: 41
Joined: Mon Feb 09, 2009 11:39 pm
Full Name: Andrew Bailey

CBR Ignition for 2-Stroke

Unread post by andy bailey »

has anybody tried to use 4-Stroke electronic ignition (with a wasted spark) on a twin cyl 2-Stroke I know it,s a stupid question to ask got loads of Honda 600 ignitions thought I'd try it on a T500 twin cheers :oops:
lang
Setting the Fastest Lap
Posts: 262
Joined: Sun Jan 17, 2010 4:42 pm
Full Name: howard langham

Re: CBR Ignition for 2-Stroke

Unread post by lang »

Hi Andy,there is no doubt that the Honda CBR ignition system would work on your Suzuki T500. The problem would be in reprograming the ignitor box, the Honda has a full advance curve, but the two stroke would at the least need a static setting, or preferably a slight advance with a steady retard as it approaches high RPM. Without this a seizure or a holed piston would be very likely, hope this helps. Hope you and Tony are both well, who is riding the new bike , you or Tony ?
andy bailey
Fired Up
Posts: 41
Joined: Mon Feb 09, 2009 11:39 pm
Full Name: Andrew Bailey

Re: CBR Ignition for 2-Stroke

Unread post by andy bailey »

thanks for that Howard I knew there would be somebody on here clever enough to say don,t waste your time if or hopefully when it,s ready I think
father will have a go .
Post Reply