A very little used MRE rolling chassis approximately 3yrs old.
This Chassis is a complete rolling unit, fitted with Fairing, Wheel arch,seat, floor, clocks, brake system, tyres ect. Tyres are good and almost like new. All the Chassis requires is the engine and gearbox fitting which is supplied with the bike.
The Engine is a gem just had a full rebuild at Bennett BMW. Dry sump, fast Cam, Racing clutch, High compression Moorespeed slipper pistons, Del Orto race carbs, and Pazon electronic ignition. The gearbox is sound and a five speed unit.
Two exhausts are supplied with the bike one stainless 2 into 1 system. The other is twin pipe megaphone style system. There is also a spare set of cylinder heads and a bottom end which is in need of attention. Plus a few other bits I will include with it.
It's a lovely bike which will make a superb Outfit when assembled with a minimum value of £15k I dont have time to finish this bike which I took in part exchange against my Bellas Imp.
So I'm offering it at the reasonable price of £9950. Tel me on 07785 977722. Can be viewed at my Classic bike shop in Shipley. BD17 7BP
MRE BMW Rolling Chassis
- Eddy Wright
- Throttle on the Stop
- Posts: 644
- Joined: Wed Sep 20, 2006 4:01 pm
- D/P/T/M/S: Driver
- Full Name: Eddy Wright
- Location: North Yorkshire
- Contact:
MRE BMW Rolling Chassis
Eddy Wright
Free Styler
Free Styler
- steve-e
- Site Admin
- Posts: 8943
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: MRE BMW Rolling Chassis









IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember
- mrequipe
- Lapping the Tail Enders
- Posts: 311
- Joined: Wed Sep 20, 2006 6:21 pm
- D/P/T/M/S: driver / manufacture
- Full Name: mike richards
- Location: Limoges, France
- Contact:
Re: MRE BMW Rolling Chassis
See below
Last edited by mrequipe on Wed Jun 11, 2014 6:35 am, edited 1 time in total.
http://www.mrequipe.net
M R Equipe the choice of Classic Sidecar Champions
19 Championship Wins in European / British Classics and F2 class.
Classics are the future
M R Equipe the choice of Classic Sidecar Champions
19 Championship Wins in European / British Classics and F2 class.
Classics are the future
- mrequipe
- Lapping the Tail Enders
- Posts: 311
- Joined: Wed Sep 20, 2006 6:21 pm
- D/P/T/M/S: driver / manufacture
- Full Name: mike richards
- Location: Limoges, France
- Contact:
Re: MRE BMW Rolling Chassis
The handle bars / fuel tank and many other parts were not made or put on by me. Chassis was bought as a chassis kit by Stuart Applegate and he made many of the parts and fitted them.
http://www.mrequipe.net
M R Equipe the choice of Classic Sidecar Champions
19 Championship Wins in European / British Classics and F2 class.
Classics are the future
M R Equipe the choice of Classic Sidecar Champions
19 Championship Wins in European / British Classics and F2 class.
Classics are the future
- Eddy Wright
- Throttle on the Stop
- Posts: 644
- Joined: Wed Sep 20, 2006 4:01 pm
- D/P/T/M/S: Driver
- Full Name: Eddy Wright
- Location: North Yorkshire
- Contact:
Re: MRE BMW Rolling Chassis
Hi Mike, I know Stuart changed the bars to suit his stature, but all the rest appears to be original MRE. Perhaps you would be kind enough to enlighten us.
Eddy Wright
Free Styler
Free Styler
- ianw
- Opposite Lock Through the Chicanes
- Posts: 923
- Joined: Thu Jun 15, 2006 9:52 pm
- Location: Wirral
Re: MRE BMW Rolling Chassis
Any pics with the fibreglass off?
-
- One Lap Completed
- Posts: 94
- Joined: Sun Jun 06, 2010 12:07 pm
- D/P/T/M/S: Ex Passenger
- Full Name: tim dixon
- Location: Isle of Man
Re: MRE BMW Rolling Chassis
Surely Apple's the man to ask.At least then there will be nothing wrongly sold!!
- Eddy Wright
- Throttle on the Stop
- Posts: 644
- Joined: Wed Sep 20, 2006 4:01 pm
- D/P/T/M/S: Driver
- Full Name: Eddy Wright
- Location: North Yorkshire
- Contact:
Re: MRE BMW Rolling Chassis
Stuart Applegate says he would be happy to discuss the bikes history with anyone interested. Stuart bought it new, as Mike says in kit form. He went on to do the parade lap on at the TT. I think he also took it to Quoix (Croix? - SE). I have Stuarts tel number if any interested parties wish to speak to him please contact me for his number. Ianw I will post some pics with the glass off soon.
Eddy Wright
Free Styler
Free Styler
- steve-e
- Site Admin
- Posts: 8943
- Joined: Wed Jun 14, 2006 6:12 pm
- D/P/T/M/S: resting Passenger
- Full Name: Steve English
- Skype contact: steveenglish.com
- Twitter: @steveinmarden
- Location: Marden, Kent
- Contact:
Re: MRE BMW Rolling Chassis
More photos added, I've put them in a gallery on the bottom of the full advert on the site here
http://www.steveenglish.com/index.php/8 ... -a-rolling
http://www.steveenglish.com/index.php/8 ... -a-rolling
IF YOU'VE FORGOTTEN YOUR LOGIN EMAIL ME, WE ARE GOING BACK TO BEING LOGGED IN TO READ.
steve@steveenglish.com subject:login and whatever details you remember
steve@steveenglish.com subject:login and whatever details you remember