I'm overhauling the brake system on a DMR, and am wondering if anybody can answer a couple of questions I have regarding the master cylinders, as I need to check they are they right way around (I have no idea if somebody before me has put them back in the right order).
The front 2 callipers are AP CP3386's which are plumbed to a AP 3/4 master cylinder
the rear and side callipers are AP CP2696-38E0's which are plumbed to an AP 5/8 master cylinder.
Does this sound right?
I have checked with another guy here with a DMR and his has 5/8 masters running both.
cheers
Brake system question (DMR)
- Eurocup
- Setting the Fastest Lap
- Posts: 260
- Joined: Wed Jun 21, 2006 6:48 am
- D/P/T/M/S: Driver, Ex-passenger
- Full Name: Eckart Roesinger
- Location: Trier/Germany
- Contact:
Re: Brake system question (DMR)
Hi
this is right. 3/4 ans 5/8
Change them completly, dont try to repair them.
bye Eckart
this is right. 3/4 ans 5/8
Change them completly, dont try to repair them.
bye Eckart