I haven’t had a chance to read all the way through yet (hardly read it at all to be honest), but there are a couple of points that have been brought up in conversation with Mark and Tim that you may want to look at before heading off to the Island.
Link to download of TT REGS (in case the box below doesn’t appear on your mobile)
If we see any more we will add them on here..
6.2. All main mounting pins/plates such as forward of the steering head must be secured
to the bodywork with a steel plate no smaller that 100mm square. This must be both
riveted and bonded (e.g. fibreglass/resin) to the bodywork in order to render it a
permanent and secure fixing point. For verification purposes all Rivet Heads must be
intact and visible on the outside of the bodywork.
6.3. There must be no fewer than four main mounting pins/pegs secured with “R” clips
dispersed appropriately around the main bodywork. All bodywork fixing pins/pegs
must always be secured with “R” clips or similar.